Free Standard Delivery on all orders over 25000 PKR

SYNCO-logo

Professional Wireless Clip on Microphone SYNCO G1(A1)

The SYNCO G1(A1) is a 2.4 GHz professional wireless clip-on microphone with one detector. Stage performances, lectures, and vlogs benefit greatly from the SyncoderTM4.0 translated transmission, significant transmitter, and one-to-one concentrative responsiveness, one-click noise reduction and gain adjustment, and extended battery life. But if a charging case that can wirelessly charge the entire device and provide storage is required, the G1 Pro is superior.

SyncoderTM Encrypted

SyncoderTM Encrypted Transmission Algorithm

This clip-on microphone wireless at 2.4 G uses the special SyncoderTM encrypted transfer algorithm, which is based on the frequency spread spectrum (FHSS), to enable 128-bit translated signal transfer and automated channel changing. It provides a strong signal everywhere and doesn't require a license or frequency calling.

Consistent Transmission Even at A 200m Distance

A longer operating range and more trustworthy signal transmission are made possible by the crucial microphone transmitter and one-to-one concentrative response. The G1 (A1) digital wireless microphone can transmit signals without distortion up to 656 feet (200 meters) in line of sight and can even function well up to 164 feet (50 meters) in difficult environments.

Steady Transmission
First DSP Wireless

First DSP Wireless Lapel Clip-on Microphone

The DSP (digital signal processor), which is utilized in the SYNCO clip on the wireless microphone for the first time, enables G1 (A1) to reuse audio in real-time. After the transmitter converts the analog signals it has collected into digital signals for audio re-calibration, the receiver receives the repurposed audio across the whole transmission. As a result, post-processing won't require much time, and the audio performance will continue to be of outstanding quality.

True Adjustment for Clear, Clean Sound

The rearmost noise cancellation algorithm of the SYNCO G1 (A1) wireless clip-on microphone provides active noise reduction and one-click reduction as needed. The gain control button, which offers four position adjustments totaling 30 dB on both the transmitter and receiver, enhances signal conditions smoothly and successfully. One can hear the input sounds and cover what's recorded using the 3.5 mm TRS headphone jack.

True Adjustment
Protected Channel

Record audio in protected channel mode at a 6 dB lower level.

A press on the On/ Off button on the receiver enables the switch between Mono mode and defended Channel mode. The right channel is recorded at a 6dB lower level when the Protected Channel mode is enabled to prevent undetected audio spikes. This provides an audio fallback for the capture. The low-profile recording is possible with the included external lav microphone.

Large Battery Capacity for Continuous Support

If conditions permit, a 400mAh charging Li-ion battery is installed in G1 (A1) to enable eight hours of recording. Based on a unique, tailored outcome, this professional wireless microphone clip-on shirt can be charged while in use and can reach 50 power in about 40 minutes and 80 power in an hour. The power index indicates its condition; it flashes to indicate low battery, remains green during charging, and goes out when fully charged.

Big Battery Capacity
Small Collar Clip Wireless

Compact Wireless Collar Clip Microphone with Wide Compatibility

The tiny wireless clip-on microphone system is a repairable camera and collar that can be hidden from view while recording. Its receiver is compatible with almost all 3.5 mm input recording devices because it includes a 3.5 mm TRS audio interface to accept the supplied 3.5 mm TRRS/TRS lines. Audio can be immediately converted into digital signals using the universal digital Type-C device. With the included TRS/TRRS/Type-C string, the G1 (A1) can be used with loudspeakers, cameras, PCs, and cellphones.

SYNCO Special Features

Transmitter (TX )

Wireless TransmissionDigital 2.4GHz
RF Frequency Band2400-2483.5MHz
Working Distance656ft/200m (LOS area);
164ft/50m (NLOS area)
MountingPocket Clip
Audio Input3.5 mm TRS Mic Input
Power Requirements5V 1A
Battery TypeBuilt-in Lithium Battery, 400mAh
Battery Charging Time2H
Battery Life8H
Dimensions52X42X16mm
MaterialABS
Weight35g

Microphone

Form FactorBuilt-in/External Mic
Polar PatternOmnidirectional
Frequency Response50Hz-20KHz
Sensitivity-40dB (┬▒3 dB, re 1V/Pa at 1KHz)
Maximun SPL120dB SPL (at 1KHz)

Receiver (RX)

Wireless TransmissionDigital 2.4GHz
RF Frequency Band2400-2483.5MHz
Working Distance656ft/200m (LOS area);
164ft/50m (NLOS area)
Latency20ms
MountingPocket Clip
Number of Audio Channels2
Audio Output3.5 mm TRS Mic Output;
3.5 mm TRS Headphone Output;

Type-C Output
Gain1~30dB
Power Requirements5V 1A
Battery TypeBuilt-in Lithium Battery, 400mAh
Battery Charging Time2H
Battery Life8H
Dimensions52X42X16mm
MaterialABS
Weight35g
Scroll to Top